44
VPX3-TL BIOS
BIOS Item Options Description
Device power-up delay
Auto, Manual Maximum time the device will take before
it properly reports itself to the Host
Controller. 'Auto' uses default value: for a
Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
3.11 AMI Graphic Output Protocol Policy
Aptio Setup – AMI
Advanced
Intel(R) Graphics Controller
Intel(R) GOP Driver [17.0.1061]
Output Select [DP3[ACTIVE]]
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
Intel(R) GOP Driver Info-only
Output Select DP3[ACTIVE] Output Interface