ADLINK Technology VPX3-TL BIOS - Platform Thermal Configuration

35
VPX3-TL BIOS
Tcc Offset Clamp Enable
Enabled
Disabled
Tcc Offset Clamp bit Enable for Running
Average Temperature Limit(RATL) feature
to allow CPU to throttle below P1.
Tcc Offset Lock Enable
Enabled
Disabled
Lock Enable for Running Average
Temperature Limit(RATL) feature to lock
Temperature Target MSR.
Bi-directional PROCHOT#
Enabled
Disabled
When a processor thermal sensor trips
(either core), the PROCHOT# will be
driven.
Disable PROCHOT# Output
Enabled
Disabled
Enable/Disable PROCHOT# Output
Disable VR Thermal Alert
Enabled
Disabled
Enable/Disable VR Thermal Alert
PROCHOT Response
Enabled
Disabled
Enable/Disable PROCHOT Response
PROCHOT Lock
Enabled
Disabled
Enable/Disable PROCHOT Lock
ACPI T-States
Enabled
Disabled
Enable/Disable ACPI T-States.
3.6.2 Platform Thermal Configuration
Aptio Setup – AMI
Advanced
Platform Thermal Configuration
Critical Trip Point [Disabled]
Active Trip Point 0 [87 C]
Active Trip Point 1 [55 C]
Passive Trip Point [95 C]
Passive TC1 Value 1
Passive TC2 Value 5
Passive TSP Value 10
Active Trip Points [Disabled]
Passive Trip Points
[Enabled]
Critical Trip Points [Disabled]
><: Select Screen
PCH Temp Read [Enabled] ^v: Select Item
CPU Energy Read [Enabled] Enter: Select
CPU Temp Read [Enabled] +/-: Change Opt.
Alert Enable Lock [Disabled] F1: General Help
CPU Temp 72 F8: Previous Values
F9: Optimized Default
Boot DTS Read [Disabled] F10: Save & Exit
ESC: Exit