ADLINK Technology VPX3-TL BIOS - Boot Menu; Boot Configuration

75
VPX3-TL BIOS
7 Boot Menu
This menu contains the settings for bootable devices in the system.
Aptio Setup – AMI.
Main Advanced Chipset Server Mgmt Security Boot Save & Exit
Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Enabled]
Fast Boot [Disabled]
Boot mode select [UEFI]
Boot Configuration
Boot Option #1 [Hard Disk]
Boot Option #2 [NVMe]
Boot Option #3 [Built-in EFI Shell]
Boot Option #4 [CD/DVD]
Boot Option #5 [SD] ><: Select Screen
Boot Option #6 [USB Hard Disk] ^v: Select Item
Boot Option #7 [USB CD/DVD] Enter: Select
Boot Option #8 [USB Key] +/-: Change Opt.
Boot Option #9 [USB Floppy] F1: General Help
Boot Option #10 [USB Lan] F8: Previous Values
Boot Option #11 [Network] F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
Setup Prompt Timeout 1 Number of seconds to wait for setup
activation key. 65535 (0xFFFF) means
indefinite waiting.
Bootup NumLock State On
Off
Select the keyboard NumLock state
after system boot.
Quiet Boot Disabled
Enabled
Enabled: will show splash screen during
POST.
Disabled: will show boot message
during POST.
Fast Boot Disabled
Enabled
Enable or disabled Fast boot feature.
Most probes are skipped to reduce time
cost during boot.
Boot mode select LEGADY
UEFI
Select boot mode, LEGACY/UEFI.