ADLINK Technology VPX3-TL BIOS - 5.1 System Event Log

68
VPX3-TL BIOS
5.1 System Event Log
Aptio Setup – AMI
Server Mgmt
Enabling/Disabling Options
SEL Components [Enabled]
Erasing Settings
Erase SEL [No]
When SEL is Full [Do Nothing]
Custom EFI Logging Options
Log EFI Status Codes [Error code
NOTE: All values changed here do not take
effect until computer is restarted.
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
SEL Components
Disabled
Enabled
Change this to enable or disable event
logging for error/progress codes during
boot.
Erase SEL
No
Yes, On next reset
Yes, On every reset
Choose options for erasing SEL.
When SEL is Full
Do Nothing
Erase Immediately
Choose options for reactions to a full SEL.
Log EFI Status Codes
Disabled
Both
Error code
Progress code
Disable the logging of EFI Status Codes or
log only error code or only progress code
or both.