ADLINK Technology VPX3-TL BIOS - GT - Power Management Control

26
VPX3-TL BIOS
3.2.2 GT – Power Management Control
Aptio Setup – AMI
Advanced
GT – Power Management Control
RC6(Render Standby) [Enabled]
Maximum GT frequency [Default Max Frequency]
Disable Turbo GT frequency [Enabled]
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
RC6(Render Standby) Enabled
Disabled
Check to enable render standby support.
Maximum GT frequency
Default Max
Frequency, 100Mhz,
150Mhz, 200Mhz,
250Mhz, 300Mhz,
350Mhz, 400Mhz,
450Mhz, 500Mhz,
550Mhz, 600Mhz,
650Mhz, 700Mhz,
750Mhz, 800Mhz,
850Mhz, 900Mhz,
950Mhz, 1000Mhz,
1050Mhz, 1100Mhz,
1150Mhz, 1200Mhz
Maximum GT frequency limited by the
user. Choose between 350MHz (RPN) and
1350MHz (RP0). Value beyond the range
will be clipped to min/max supported by
SKU
Disable Turbo GT
frequency
Enabled
Disabled
Enabled: Disables Turbo GT frequency.
Disabled: GT frequency is not limited