ADLINK Technology VPX3-TL BIOS - 5.4 ADLINK IPMI Configuration

71
VPX3-TL BIOS
5.4 ADLINK IPMI Configuration
Aptio Setup – AMI
Server Mgmt
PCB Version A1
Geographical Address 0x1C
System Controller Host
NVMRO Signal Non Protect
Heater Status Off
IPMI Product ID PCIe SKU
NVMRO item Control [Non-Protect]
REF_CLK Support [Enabled]
AUK_CLK Support [Enabled]
SYS_RESET Support [Enabled]
XMC Control [Non-Ignore]
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
PCB Version Info-only
Geographical Address Info-only
System Controller Info-only
NVMRO Signal Info-only
Heater Status Info-only
IPMI Product ID Info-only
NVMRO item Control
Protect
Non-Protect
Enable or disable NVMRO Control support.
REF_CLK Support Disabled
Enabled
Enable or disable REF_CLK support.
AUK_CLK Support Disabled
Enabled
Enable or disable AUK_CLK support.
SYS_RESET Support Disabled
Enabled
Enable or disable SYS_RESET support.
XMC Control
Ignore
Non-Ignore
Ignore or non-ignore XMC