ADLINK Technology VPX3-TL BIOS - PEG Port Feature Configuration

56
VPX3-TL BIOS
Select PCIE Card
Auto, Elk Creek 4,
PEG Eval
Select the card used on the platform
> External Gfx Card
Primary Display
Configuration
Submenu N/A
Internal Graphics Auto, Disabled,
Enabled Keep IGFX enabled based on the setup
options.
GTT Size 2MB, 4MB, 8MB Select the GTT Size
Aperture Size 128MB,256MB,
512MB, 1024MB
Select the Aperture Size
DVMT Pre-Allocated
0M, 32M, 64M, 96M,
128M, 160M, 4M,
8M, 12M, 16M, 20M,
24M, 28M, 32M/F7,
36M, 40M, 44M,
48M, 52M, 56M, 60M
Select DVMT 5.0 Pre-Allocated (Fixed)
Graphics Memory size used by the Internal
Graphics Device.
DVMT Total Gfx Mem
128M, 256M, MAX Select DVMT5.0 Total Graphic Memory
size used by the Internal Graphics Device.
Intel Graphics Pei Display
Peim
Disabled
Enabled
Enable/Disable Pei (Early) Display
4.1.3 PEG Port Feature Configuration
Aptio Setup – AMI
Chipset
PEG Port Feature Configuration
Detect Non-Compliance Device [Disabled]
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit