ADLINK Technology VPX3-TL BIOS - 3.13 Network Stack Configuration

49
VPX3-TL BIOS
BIOS Item Options Description
Data Bits EMS
Info-only
Parity EMS
Info-only
Stop Bits EMS
Info-only
3.13 Network Stack Configuration
Aptio Setup – AMI
Advanced
Network Stack [Disabled]
IPv4 PXE Support [Disabled]
IPv4 HTTP Support [Disabled]
IPv6 PXE Support [Disabled]
IPv6 HTTP Support [Disabled]
PXE boot wait time 0
Media detect count 1
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
Network Stack
Disabled
Enabled
Enable/Disable UEFI Network Stack
IPv4 PXE Support
Disabled
Enabled
Enable/Disable IPv4 PXE boot support. If
disabled, IPv4 PXE boot support will not
be available.
IPv4 HTTP Support
Disabled
Enabled
Enable/Disable IPv4 HTTP boot support. If
disabled, IPv4 HTTP boot support will not
be available.
IPv6 PXE Support
Disabled
Enabled
Enable/Disable IPv6 PXE boot support. If
disabled, IPv6 PXE boot support will not
be available.
IPv6 HTTP Support
Disabled
Enabled
Enable/Disable IPv6 HTTP boot support. If
disabled, IPv6 HTTP boot support will not
be available.