229
ADOBE AUDITION 1.5
User Guide
To save a session:
1 Do one of the following:
• Choose File > Save Session to save changes to the current session file. Alternatively, click
the Save button in the Multitrack File toolbar.
• Choose File > Save Session As to save changes to a different session file. Alternatively,
click the Save As button in the Multitrack File toolbar.
• Choose File > Save All to save all open sessions.
2 Choose a location for the file, and type a filename.
3 Select Save Copies Of All Associated Files to save a copy of every file used in a session into
the same folder as the session file. It is highly recommended that you select this option.
If you want to save the associated files in a different format, click Options, select Save All
Copies In This Format, and select a format from the list. To view options for the selected
format, click Format Properties. For more information on format-specific options, see
“Choosing an audio file format” on page 231.
4 Click Save.
To convert the sample rate of a session:
1 Choose File > Save Session As, choose a location for the file, and type a filename.
2 Select Save Copies Of All Associated Files, and click Options.
3 Select Convert Sample Rate, and select a sample rate.
4 To set dithering and other conversion options, click Conversion Properties. For more
information on conversion options, see “Converting the sample type” on page 110.
5 Click Save.
Exporting mixes to audio
After you finish mixing a session, you can export it in a variety of common audio file
formats. When you use the File > Export > Audio command, everything in the session is
exported to an audio file. If you want to export only specific waves, use the Edit > Mix
Down To File command instead. (See “Mixing down ReWire tracks and specific audio
clips” on page 196.)
ug.book Page 229 Tuesday, March 16, 2004 1:29 PM
To Next Page
Loading...