CHAPTER 1
36
Looking at the Work Area
To select a preset in a pop-up palette:
1 Click the triangle next to the thumbnail image
of the current preset. When selecting a brush or
gradient, be careful not to click the thumbnail
image—doing so will display the settings editor for
the preset.
2 Click a preset in the pop-up palette.
To rename a brush, gradient, or pattern in a pop-up
palette:
1 Do one of the following:
• Double-click an item.
• Select an item, click the triangle ( ) in the
upper right corner of the pop-up palette,
and choose the Rename command from the
palette menu.
2 Enter a new name in the dialog box provided,
and click OK.
To delete a brush, gradient, or pattern from a pop-up
palette:
Do one of the following:
• Select an item, click the triangle ( ) in the
upper right corner of the pop-up palette,
and choose the Delete command from the
palette menu.
• Hold down Alt (Windows) or Option (Mac OS)
and click an item.
To save a library of brushes, gradients, or patterns for
later use:
Choose the Save command from the pop-up
palette menu. Then enter a name for the library
file, and click Save.
To load a library of brushes, gradients, or patterns:
Choose the Load command from the pop-up
palette menu. Then select the library file you want
to add to the pop-up palette, and click Load.
Note: Using the Load command will add the brush
library to the brushes you have available. If you
choose a preset library of brushes, the preset library
will replace your current set of brushes.
To replace the current set of brushes, gradients, or
patterns in a pop-up palette:
Do one of the following:
• Choose the Replace command from the pop-up
palette menu. Then select the library file you want
to use, and click Load.
• Choose a library file from the bottom section of
the palette menu. Then click OK to replace the
current list.
To load to the default library of brushes, gradients, or
patterns:
Choose the Reset command from the pop-up
palette menu.
To Next Page
Loading...