To Next Page

To Previous Page

Unpacking and Inspecting the Timeclock

Series 4000 Badge Timeclock Installation Guide 1-3

* If you are located outside of the United States and Canada, your Series 4000 timeclock does not

include a power cord in the box. You must order an International Kit separately that contains the

appropriate power cord for use in your country.

A mounting template is also included to help you mark the position of the

timeclock.

Note

If you ordered either of the option kits (backup battery, internal AC outlet), they

are sent to you packaged separately in their own boxes, and with their own

installation instructions.

Number Part

1 Cover assembly, including an integral bar code reader

2 Base of the timeclock and hinge

3 Power cord strain relief clip, with two screws and two nuts (packed

with other accessories in a plastic bag)

4 Security wrench, three pointed mounting screws, three anchors, and

two flat screws (not pointed)

5 Transformer

6 Plate and two nuts to convert square cable access opening in the

timeclock to a round opening (packed with other accessories in a

plastic bag)

7 Two power cords: 6 ft. (182.88 cm) to plug the timeclock into an

external AC outlet; 12 in. (30.48 cm) to plug in a timeclock mounted

over an AC outlet*

8 One supervisor badge, one maintenance badge (packed with other

accessories in a plastic bag)

Questions and Answers:

Need help?

Do you have a question about the Adp 4000 Series and is the answer not in the manual?

Adp 4000 Series Specifications

General