Adp 700 User Manual

ADP ezLaborManager Visual Reference Card
ADP 700 Timeclock Setup
1
K.E./M.D./S.M. © 2014 by ADP, LLC
ADP 700 Timeclock Setup
Setting up and Wiring an ADP 700 Timeclock
1. If you indicated on the order form that you intended to use an Ethernet connection; the contents of
your timeclock boxes should contain:
A. ADP 700 Timeclock
B. Power Supply
C. Using a Finger Scanner instructions
D. ADP 700 Quick Start Guide
E. ADP 700 Installation and Setup Guide
F. Mounting hardware
G. 6 ft. Ethernet cable
A
B
C
D & E
F
G

Adp 700 Specifications

General

Brand	Adp
Model	700
Category	Clock
Language	English

Summary

Setting up and Wiring an ADP 700 Timeclock

Ethernet Connection Contents

Lists components included for setting up the ADP 700 Timeclock via Ethernet connection.

Direct Serial Connection Contents

Lists components included for setting up the ADP 700 Timeclock via Direct serial connection.

Timeclock Thumbscrew Preparation

Instructions on loosening the timeclock's left-side thumbscrew to enable access.

Opening the Timeclock Front Panel

Procedure for unlocking and opening the timeclock front plate to reveal internal components.

Internal Jacks Identification

Visual guide identifying the Power, Ethernet, and Serial Jacks located inside the timeclock.

Ethernet Cable Connection

Guide for connecting cables for an Ethernet setup, including securing the power cable with a zip tie.

Direct Serial Cable Connection

Instructions for connecting the CAT 3 cable, RJ11 adapter, and USB cable for Direct serial setup.