Adp 4000 Series User Manual

Supplying Power to the Timeclock and Verifying Operation
Series 4000 Badge Timeclock Installation Guide 2-25
Verifying Operation of the Timeclock
When you supply power to the timeclock, it initializes itself, performs internal
diagnostics, and starts the operating system and timeclock application. This
process takes approximately one minute.
If the initialization completes successfully, the Communications Setting screen
appears. Go to page 2-26, then to Chapter 3, “Performing Local Configuration.”
If the Communication Setting screen does not appear, the timeclock did not
initialize successfully. Contact your TLM Representative.
Device ID
Changing comm settings causes a reboot!
Gateway
IP Address
Subnet Mask

Adp 4000 Series Specifications

General

Brand	Adp
Model	4000 Series
Category	Clock
Language	English