Adp 4000 Series User Manual

Checklist of Installation and Configuration Tasks
_____
Unpack and inspect the Series 4000 badge timeclock.
See page 1-2.
_____
Determine a suitable location for the Series 4000 timeclock
. See page 1-4.
_____
Obtain communication settings to be used for the Series 4000 timeclock
from your network administrator. Settings include device ID, IP address, subnet
mask, and gateway.
_____
Plan access for Ethernet cable connections to and into the Series 4000
timeclock
. See page 1-6.
_____
If necessary, widen the badge reader slot
. See page 2-5.
_____
Prepare the location for the Series 4000 timeclock
. See page 2-2.
_____
Mount the timeclock base
. See page 2-8.
_____
Assemble the Series 4000 timeclock and connect all cables
. See page 2-12.
_____
Remove the mylar strip from the lithium battery
on the inside cover of the
timeclock. See page 2-21.
_____
Plug in the Series 4000 timeclock and verify that it is operating properly
.
See page 2-21.
_____
Perform local configuration
at the Series 4000 timeclock. See page 3-1.
_____
Add the Series 4000 timeclock as a device in your ADP system
. For
guidance based on the host application you are using, see page 3-9.
_____
Test communication between the host application and the Series 4000
timeclock
. For guidance based on the host application you are using, see
page 3-9.
_____
Perform remote configuration using installed ADP software
. Includes
defining the badge timeclock’s features, functions and transactions. For
guidance based on the host application you are using, see page 3-9.
_____
Perform configuration at the ADP host application and download
information to the Series 4000 timeclock.
For guidance based on the host
application you are using, see page 3-9.

Adp 4000 Series Specifications

General

Brand	Adp
Model	4000 Series
Category	Clock
Language	English