ADS-MAR
2022-10-11 © Automotive Data Solutions Inc. 1/2
QUICK START GUIDE
WEB PROGRAMMING
INSTALL THE WEBLINK DESKTOP APPLICATION1.
Go to www.idatalinkmaestro.com/plugin, select your software version (Mac or PC) and follow the installation
steps. Be sure to review the system requirements before installing.
REGISTER A WEBLINK ACCOUNT2.
Once installed, complete the Weblink registration process and log into Weblink.
CONNECT THE MODULE TO YOUR COMPUTER3.
Use the included USB cable to connect your iDatalink Maestro module to your computer.
WEBLINK PROGRAMMING4.
Follow the programming steps until your module is flashed, then download your install guide and owner’s
manual if applicable.
COMPLETE VEHICLE-SPECIFIC INSTALLATION5.
Follow the steps in your install guide and complete the installation. ADS recommends having your iDatalink
Maestro device installed by a certified technician. Additional accessories may be required and sold separately.
LIMITED 1-YEAR WARRANTY
Automotive Data Solutions Inc. (“ADS”) warrants to the original purchaser of the product that the following
components product shall be free of defects in material and workmanship under normal use and circumstances
for the period of one (1) year from the date of original installation.
“Authorized Dealer” is defined by ADS as a company who qualifies to purchase products directly from ADS, or
one of its approved distributors. Thus, products not sold nor installed by an Authorized Dealer are not covered
by this warranty. This includes, but is not limited to, ADS products sold on Amazon.com, eBay.com,
Walmart.com and Newegg.com. To find an authorized retailer near you, visit
http://maestro.idatalink.com/find-product.
To Next Page
Need help?
General
