ADS EOS - Parts Cleaning and Replacement; Suction Mouthpiece Hood Care

ADS
EOS Extraoral Suction System , Instructions For Use and Installation
ADS
Dental System
7
Parts
Cleaning
and
Replacement
• When installing or removing the suction mouth piece hood , hold it by the
connecting end , instead of by the far end .
• To clean the equipment surface , use a disinfectant wipe and dry with a soft cloth .
• ADS
recommends
to use VIROS
OPTIM1 hydrogen
peroxide
disinfectant
.
7.1 Suction mouth piece hood
[ Daily Clean ] Use wiping disinfectant or spray disinfectant to clean the product surface .
ADS recommends to use VIROS OPTIM1 hydrogen peroxide disinfectant .
[
Replacement ]
• The suction mouthpiece hood is autoclavable .
• Turn off
the power and
remove power cord .
• Keep your
hands Dry .
•
Wear gloves .
• Loosen up the three screws in the suction mouth piece
hood .
• Replace
with a new hood and
tighten up the screws
.
O
15