ADT Model 927 Water Recycling System
P/N 90927-SPPM-000-00
vi
3.3 Replacing the slurry bag filter
Open the lower front and side covers.
Connect an elbow fitting for a 12 mm tube to the filter drain.
Figure 3-6. Slurry bag-filter (F2)
Connect a drain tube from the filter to an external drain.
Open the filter drain valve, and let the water drain out.
Use the supplied filter opening tool to remove the filter body, in a
counter-clockwise direction.
Remove the dirty bag-filter, and clean it or replace it.
To Next Page
Loading...