ADT 927 - Overview

ADT Model 927 Water Recycling System
P/N 90927-SPPM-000-00
i
1. OVERVIEW
The ADT Model 927 Water Recycling System provides a closed-loop
uniform supply of water, which is used for dicing machines.
The system recycles the saw drain water through a number of filters, cools
the water to a set temperature, and delivers a steady flow of water to the
dicing machine.
The 927 preventing maintenance procedure is recommended to be
performed every 6 months under regular conditions. The preventing
maintenance procedure is done in addition to the maintenance tasks that
are performed routinely on a periodic basis, and maintenance performed
because of warnings displayed by the PLC. For further information regard
routinely maintenance, see 927 full operation and maintenance manual at
section 6.