ADT Keychain Remote User Manual

Testing
B
You can test your ADT Keychain Remote by performing
a Walk Test on the ADT Security Hub, pressing any
button on the remote while within 15 feet of the ADT
Security Hub, and then checking its status on the
touchscreen. See the ADT Security Hub User Guide
for more details.
Use
C
• Press the Disarm button on your remote for
2 seconds to disarm the ADT Security Hub. Door,
window, and motion detectors will be disarmed.
• Press the Away button on your remote for 2 seconds
to arm the ADT Security Hub. Door, window, and
motion detectors will be armed.
• Press the Stay button on your remote for 2 seconds
to arm the ADT Security Hub in Stay Mode. Door and
window detectors will be armed.
• Press the * and Stay buttons on your remote for
3 seconds to send a panic alert (requires optional
ADT professional monitoring service).
Note: If you have an ADT professional monitoring service
activated, additional testing is required whenever you
connect a new device. Follow the on-screen instructions
in the SmartThings app to complete testing.

ADT Keychain Remote Specifications

General

Brand	ADT
Model	Keychain Remote
Category	Security System
Language	English