ADT Pulse OC810-ADT - Enabling the Motion Detection via the ADT Security System; Automations Configuration

ADT Pulse
®
Interactive Solutions OC810-ADT Wireless Outdoor Day/Night Camera
Installation Guide
11
Enabling the Motion Detection via the ADT Security System
1. Click the Automations tab, and then click the Add Automation button.
2. Select a trigger for this automation from the Trigger drop-down list.
3. Select Motion from the Event drop-down list.
4. Select the conditions under which you want the automation action to occur
from Active drop-down list.
5. Click Add Actions.
6. From the delay drop-down list, select the delay option you want to use for this
action.
7. Select the desired option from Attach drop-down list.