ADT Pulse OC810-ADT - Physical Details - OC810-ADT Wireless Outdoor Day;Night Camera

ADT Pulse
®
Interactive Solutions OC810-ADT Wireless Outdoor Day/Night Camera
Installation Guide
2
Physical Details – OC810-ADT Wireless Outdoor
Day/Night Camera
Front Panel - Wireless Camera
Figure 1: Front Panel
1. Lens
No physical adjustment is required or possible for the lens,
but you should ensure that the lens cover remains clean.
Image quality is degraded if the lens cover is dirty or
smudged.
2. Power LED
On - Powered on.
Off - No power.
Blinking - The Power LED blinks during power up. (This can
take up to 20 seconds.)
3. Light Sensor
The Light Sensor detects luminance.
4. IR LEDs
The LEDs allow the camera to see images at night or in a
dark environment.