– 8 –
QUICK VIEW OF SYSTEM FUNCTIONS
REMOTE PHONE CONTROL OPERATION
To remotely disarm: --------------------- + [1]
To remotely arm in AWAY mode: -- + [2]
To remotely arm in STAY mode: --- + [3]
To remotely bypass a zone: ----------- + [6] + zone no.
To remotely activate forced bypass: ------------ + [6] + [#]*
To remotely check system status: - [*]
To hang up: ---------------------------------- + [9]
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date: -------------- + FUNCTION + [63]
To add a user code: ----------------------
**
+ CODE + user no. (02-08)+ user code
To delete a user code (except Master Code):
**
+ CODE + user number (02-08)
To turn Test mode on: ------------------ + TEST
To turn Test mode off: ------------------ + OFF
To use the defined AUX function: --Press and hold AUX key 2 seconds (4 beeps) +
** Only the master code can be used to add or delete another user code.
To Next Page
Loading...
Need help?
General
