ADTEK CM1 Series - PV High Scale Configuration; PV Display Fine Zero Adjustment; PV Display Fine Span Adjustment; Clear PV Fine Zero;Span Adjustments

CM1-SERIES
11 / 28
Rev 1.3
2018-07-02
A−3
hIsc
99(9
99(9
99(0
• • • •
90)0
20)0
hIsc(High scale): High scale of PV
Note: If the model is CM1-TR, the Lo.Sc(A-02) and
Hi.Sc(A-03) are fixed.
Setting Range: -1999~9999
(CM1-RL/CM1-F:-19999~99999)
Shift
Up
Down
Enter
A−4
pVzro
)0
00)0
• • • •
00)0
00)0
pVzro: Fine Zero Adjustment for
PV display
For Zero & Span of PV, users can get the
"Fine Adjustment" by front key. It's an easy
way to “Just Key-In” the value that the user
wants to show in the current input signal.
設定範圍: -1999~9999
Shift
Up
Down
Enter
A−5
pVspn
)0
00)0
• • • •
00)0
00)0
pVspn:Fine Span Adjustment for
PV display
It's same function as like as [pVzro].
Setting Range: -1999~9999
Shift
Up
Down
Enter
A−6
ZSclr
none
none
both
ZSclr: Clear Fine Zero & Span
Adjustment for PV display
Setting Range:
none(None): Do not clear the fine
adjustment of Low / High.
pV.zro(PV.Zro): To clear the fine
adjustment Low.
pV.spn (PV.SPn): To clear the fine
adjustment High
both(Both): To clear the fine
adjustment of Low and High
&
Cycle selection
Enter
A−7
lOcut
)0
00)0
00)0
00!0
lOcut (Low Cut): Low Cut the PV
Low Cut set to be +0.50
Low Cut is set for 0.50, if the PV is
from -0.50~+0.50, that display will be 0.
PV according
to input signal
Present
Value
Low cut
function
0.50
-0.50
)50
[ lOcut]
X1
X1
Setting Range: -1999~9999 counts
Shift
Up
Down
Enter
Low Cut set to be -0.10
-0.10
Low cut
function
Low Cut is set for -0.10, if the PV is
under (< = -0.10), that display will be -0.10.
Present
Value
PV according
to input signal
-)10
[ lOcut]
X2