4. Select the desired Network Authentication. Make sure that the host devices you intend to use support the selec-
ted authentication type.
5. Choose a WPA Passphrase and type it in to this field. You will need this passphrase for step 9.
6. Select any desired encryption preferences in the lower three fields.
7. Click Apply / Save.
8. On the left side of the gateway, press the 2.4 GHz button and hold for 4-6 seconds. This enables WPS on the gate-
way.
9. Follow the WiFi connection instructions provided with your client device to connect to the gateway. Use the SSID
name you selected in Step 3. Then enter the passphrase that you entered in step 5 in the appropriate location on
the network setup screen of your WiFi client device.
To Next Page
Loading...
Need help?
General
