To Next Page
S
Scott BassSep 12, 2025
How to fix small amount of solution reaching the brush of Advance acoustic Scrubber?
- MmirandaamandaSep 13, 2025
If a small amount of solution or no solution is reaching the brush of your Advance acoustic Scrubber, consider the following: 1. The solution/clean water filter may be clogged or dirty, requiring cleaning. 2. The solution/clean water tap might be stuck closed, needing replacement. 3. The solenoid valve could be broken, or there might be an open in the electrical connection, necessitating replacement of the valve or repair of the connection. 4. Debris in the solution tank might be clogging the output hole, so clean the tank. 5. Debris in the solution/clean water hoses could be obstructing the flow, requiring cleaning of the hoses.
General
