Advanced Elements ATTACK PRO - Assembly, Inflation, and Deflation Instructions; Kayak Assembly Steps; Understanding Kayak Valves

Attack
TM
Pro Inatable Kayak Owner’s Manual
7
3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION
The Attack™ PRO Kayak has 12” bow and stern rocker and a 35” beam that enhances its
performance.
3.1 ASSEMBLY
Your kayak comes from the factory pre-assembled. The only assembly you should need to do is
attach the adjustable seat, foot pegs, and thigh straps. The thigh straps clip to the steel d-rings
located towards the front of the kayak, in the crease between the oor and the main tubes, and
right behind the seat located on the side walls of the main tubes. The thigh straps should curve
inward with the thicker, or broader, end of the thigh strap closest to your body. Follow the
instructions and gures on pages 9 & 10 for installing the foot pegs.
3.2 UNDERSTANDING YOUR VALVES
Advanced Elements Attack™ PRO Kayak uses the following valves. The 2-way military valve
has the function and durability of other military type valves and is compatible with most
standard pumps. The following gures will have details on how to operate the valves.
TO INFLATE: use nger to push in center stem, rotate ¼ turn, and allow stem to spring up into
the up/outward position.
TO DEFLATE: Use nger to push in center stem and rotate ¼ turn to lock stem down/inward.
Self-Bailing Covered
Cargo Bay
High-Back
Adjustable Seat
Molded Rubber
Handle
12″ Bow and
Stern Rocker
2-Way Military
Valves
Thigh Straps
Full-Time Self Bailing
Adjustable Foot Braces
Drop-Stitch Floor
Durable PVC
Tarpaulin Hull
Material