Advanced Elements STRAITEDGE ANGLER PRO - Temperature Regulation and Over-Inflation; Deflation Process; Folding and Packing; Guidelines for Kayak Usage

StraitEdge
TM
Angler PRO Inatable Kayak Owner’s Manual
13
3.5 OVER INFLATION AND TEMPERATURE REGULATION
CAUTION: Water temperature and weather will aect the air pressure of the kayak. In cold
weather and water your kayak will lose some pressure. If this occurs, you may want to add a
bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air
inside the kayak will expand. You must let some air out of the appropriate chambers to prevent
the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme
temperatures (hot or cold).
3.6 DEFLATION
1. Remove the caps from chamber 1, 2, 3, 4 and 5.
2. Push valve stems inward and rotate to deate position.
3. Once the chambers are deated you can use your pump to vacuum out any additional air
to improve folding.
3.7 FOLDING
NOTICE: Reverse your pump to completely deate all chambers.
1. Completely deate all air chambers and thoroughly dry the kayak and remove the seat.
2. Fold in half, down the center, lengthwise.
3. Fold into 3 equal sections.
4. Place into duel bag.
4. GUIDELINES FOR USAGE
Paddlesports can be very dangerous and physically demanding. The user of this product should
understand that participation in paddlesports may involve serious injury or death. Observe the