Additional Items Required to Complete the Model:
• 2 x 150mm (6”) Servo extension leads
• 2 x 300mm (12”) Servo extension leads
• 8 x 600mm (24”) Servo extension leads
• Up to 7 ‘Y’ leads depending on radio system installed and glow or electric power
• 8 x Standard size servos for electric power (9 with optional retracts)
• 12 x Standard size servos for glow power (13 with optional retracts)
• Thin CA adhesive
• Medium CA adhesive
• 12 or 30 Minute epoxy glue
• Masking tape
• 3mm Ball ended Allen key
• ‘Z’ bend pliers
• Philips head screwdriver
• High capacity receiver battery and switch harness
• 4 x .25 - .32 size 2 stroke glow engines or 4 x .26 - .30 size four stroke engines or 4 x 600 size
brushless electric motors (e.g Himark/Himax 36-30 1000RP/V) and appropriate speed
controllers
NOTE: Speed 600 brushed motors with gearboxes could also be used as an economical option
•
4 x Velcro straps (for electric power)
•
4 x 11.1V 2500mah minimum (3200mah recommended) battery packs (for electric power)
•
Double sided tape (for electric power)
Safety Warnings
This R/C aircraft is not a toy and is designed for experienced modellers and pilots only. Serious in-
jury or damage to property can result through misuse and abuse. It is highly recommended that this
aircraft only be flown at a dedicated R/C flying site and that a qualified instructor thoroughly checks
the model before its first flight.
Your local hobby supplier should be able to assist you in regards to model flying clubs in your area.
To Next Page
Loading...