L Series & S Series Arm Replacement Instructions
IMPORTANT
Please take safety
precautions as the awning
arms are spring loaded
and can potentially cause
serious injury if not handled
properly.
1. Using a ladder, position yourself directly under the awning.
2. Secure the existing arm by wrapping it with the rope, tie downs, or bungee cords to prevent it from accidentally
springing open when removed. Leaving enough allowance for the awning to open approximately 5-7 inches.
3. Manually open the awning to 5-7 inches.
REMOVING THE EXISTING ARM
PREPARATION
What you will need:
A. New replacement arm
B. Zip Ties, Rope or Straps
C. Phillips head screw driver
D. Allen wrench
E. Socket wrench
F. 6 - 8 ft. Ladder/s
Note: We recommend having an assistant to help support the awning arm during the replacement.
Electric Models: Please disconnect from power source before proceeding with arm replacement.
Your replacement arm will arrive securely tied together, DO NOT REMOVE the tie down until the arm is securely fastened to the awning.
Replacement Arm Kit
Step1&2
Step3
To Next Page
Need help?
General
