Advaning C Series - User Manual

C Series & SG Series Replace An Awning Arm
1. Use an adjustable wrench
to slightly loosen (but do
not remove) the locking
nut from the arm tip at
front bar connection.
2. Using a power drill and
3/16 metal drill bit,
carefully drill through the
existing rivet and shim at
the arm shoulder. Remove
the shim.
3. Remove the existing bolt
from the arm shoulder
with standard athead
screw driver and mallet
forcing the bolt to pop
out.
4. Now remove the loosened
nut from the arm tip.
Note: Save nut for
securing replacement arm.
1. Using a ladder, position yourself directly under the awning.
2. Secure the existing arm by wrapping it with the rope, tie downs, or bungee cords to prevent it from accidentally
springing open when removed. Leaving enough allowance for the awning to open approximately 5-7 inches.
3. Manually open the awning to 5-7 inches.
REMOVING THE EXISTING ARM
PREPARATION
What you will need:
A. Replacement Arm Kit; Includes: New
Replacement Arm, Bolt, Shim and Rivet
B. 6-8 ft. ladder
C. Rope, tie downs, or hook bungee cords
D. Drill and 3/16 metal bit
E. Riveter
F. Standard 3”-5” long at head screwdriver
G. Mallet
H. Adjustable wrench
I. Optional: Lubricant
1.A
2.B
3
1.B
2.C
4
2.A
2.D
Note: We recommend having an assistant to help support the awning arm during the replacement.
Electric Models: Please disconnect from power source before proceeding with arm replacement.
Your replacement arm will arrive securely tied together, DO NOT REMOVE the tie down until the arm is securely fastened to the awning.
Replacement Arm Kit

Summary

Removing the Existing Arm

Loosen Locking Nut

Loosen the locking nut at the arm tip connection, but do not remove it.

Drill Out Existing Rivet

Drill through the existing rivet and shim at the arm shoulder to remove it.

Remove Existing Bolt

Use a screwdriver and mallet to force out the existing bolt from the arm shoulder.

Remove Loosened Nut

Remove the nut from the arm tip, saving it for the new arm.

Secure Arm Before Removal

Ensure the existing arm is tied securely to prevent spring mechanism activation.

Installing the New Arm

Insert New Arm Shoulder

Insert the new arm shoulder into the existing Easy Pitch mechanism.

Secure Shoulder with Bolt

Insert the new bolt to secure the arm shoulder to the Easy Pitch mechanism.

Prepare and Install Rivet

Combine new shim and rivet, then install using a riveter.

Attach Arm Tip and Tighten

Insert arm tip to front bar and tighten the locking nut securely.

Final Inspection and Tie Removal

Inspect connections and remove tie-down before testing operation.

Advaning C Series Specifications

General

Brand	Advaning
Model	C Series
Category	Accessories
Language	English