AdvanPOS WP-T810 - Page 33

WP-T810 Thermal Printer
33
Command
GS a n
Code (Hex)
1D 61 n
Name
Enable/disable automatic status back(ASB)
Command
GS b n
Code (Hex)
1D 62 n
Name
Turns smoothing mode on/off
Command
GS f n
Code (Hex)
1D 66 n
Name
Select font for Human Readable
Command
GS h n
Code (Hex)
1D 68 n
Name
Select bar code height
Command
①GS k m d1,,,dk NUL , ②GS k m n d1…dn
Code (Hex)
1D 6B ①m d1,,,dk 00 , ② m n d1…dn
Name
Print bar code
Command
GS r n
Code (Hex)
1D 72 n
Name
Transmit status
Command
GS v 0 m xL xH yL yH d1…dk
Code (Hex)
1D 76 30 m xL xH yL yH d1…dk
Name
Print raster bit image
Command
GS w n
Code (Hex)
1D 77
Name
Set bar code width
Command
FS ! n
Code (Hex)
1C 21 n
Name
Set print mode(s) for Kanji characters
Command
FS &
Code (Hex)
1C 26
Name
Select Kanji character mode
Command
FS - n
Code (Hex)
1C 2D n
Name
Turn underline mode on/off for Kanji