Advantage Engineering® TRANS PRO X-Series™
Appendix C - Maintenance
32 Manual Printed in the U.S.A. for AEC GROUP INC. Operations Manual
APPENDIX C - MAINTENANCE
6.01 MAINTENANCE PROCEDURES
The following maintenance procedures should be performed on a routine basis:
1. Check the strainer frequently or after every 50 services.
2. Clean the exterior with a plastics cleaning agent or similar product to keep the
cabinet looking new.
3. Check all hoses and wires for cuts or frays.
The unit is now ready for the next service.
• Frequently inspect and clean any tools used, and lubricate all non-sealed ratchet
mechanisms with light oil.
• The use of any other accessories not specified in this manual may cr
eate a hazard.
• Read, understand and follow Safety Instructions in the front pages of this manual and
on product safety labels.
CAUTION
To Next Page