EasyManua.ls Logo

Advantage Engineering TRANS PRO X Series - Section 1.02: Important Safety Instructions

Advantage Engineering TRANS PRO X Series
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advantage Engineering® TRANS PRO X-Series™ II. Safety Information
Operations Manual Manual Printed in the U.S.A. for AEC GROUP INC. 5
1.02 IMPORTANT SAFETY INSTRUCTIONS
Vehicle gases contain Carbon Monoxide, which is a colorless & odorless lethal gas.
• Only run engines in well ventilated areas and avoid breathing exhaust gases.
Extended breathing of exhaust gases will cause serious injury or death.
Improper use and operation.
• Read, understand and follow all safety messages and operational
procedur
es in this manual before operating the TRANS PRO system.
• This equipment should be operated only by qualified personnel.
• Use this equipment only as described in this manual.
Improper use and operation of this product can result in injury.
DANGER
WARNING
Exhaust gases, moving parts, hot surfaces, and potent chemicals may be present during use
of the transmission fluid exchange equipment.
• When using chemicals and fluids always refer to the MSDS sheets and manufacturer's
instructions for the proper pr
ocedure to handle emergency medical treatment,
cleanup, handling, and storage requirements.
Improper use of the equipment or exposure to exhaust gases, moving parts,
hot surfaces, or moving parts may cause injury
.
WARNING