Advantech ADAM-6000 series - Page 117

ADAM-6060 Command Table
Command
Syntax Command Name Description
$aaAff Configuration Sets the integration time for a
specified module
$aa6 Read Channels Status
Asks a specified input module to
return the status of all channels
#aabb Write Digital Output Writes specified values to either a
single channel or all channels
simultaneously
$aa5 Reset Status Indicates whether a specified digital
I/O module was reset after the last
time the $aa5 command was issued
$aaF Read Firmware
Version
Return the firmware version code
from the specified ADAM-6000
module.
$aaM Read Module Name Return the module name from the
specified module