Advantech ADAM-6000 series - Page 122

Command
Syntax Command Name Description
$aaAnntt Set Input Range Set the input range to the specified
channel in the analog input module
$aaBnn Read Input Range Read the input range of the specified
channel in the analog input module
#aan Read Analog Input
from Channel N
Return the input value from the
specified channel in the analog input
module
#aa Read Analog Input
from all channels
Return the input values from all
channels of the specified analog
input module
$aa0 Span Calibration Calibrate the analog input module to
correct the gain error
$aa1 Offset Calibration Calibrate the analog input module to
correct the offset error
$aa6 Read Channels Status Asks a specified input module to
return the status of all channels
$aa5mm Enable/Disable
multiplexing
Enables/Disables multiplexing
simultaneously for separate channels
of the specified input module
#aaMH Read all Max. Data Read the maximum data from all
channels in the specified module
#aaMHn Read single Max.
Data
Read the maximum date from a
specified channel in the module
#aaML Read all Min. Data Read the minimum data from all
channels in the specified module
#aaMLn Read single Min.
Data
Read the minimum data from a
specified channel in the module
$aaEmm Enable/Disable
Channels to Average
Enables/Disables the specified
channels for data average function
$aaE Read Ave. Channels Identify which channels are included
in average function
#aaDnd Set Digital Output Set the status of the specified digital
output in the ADAM-6017 module
$aaAnntt