Advantech ICAM-500 Series - Page 40

ICAM-500 Programming Guide 34
set_img_auto_exposure(enable)
Enable camera auto exposure function.
Parameters: enable
 1: Enabled
 0: Disabled
Returns: bool
Camera auto exposure function status.
 1: Enabled
 0: Disabled
See also:
image.CImage.auto_exposure
Control by image instance.
get_img_auto_exposure_range()
Get auto exposure range.
Returns: tuple(int, int)
Auto exposure range. (min, max) Value convert equation: value
* 100 (micro sec.)
See also:
image.CImage.auto_exposure_range
Control by image instance.
set_img_auto_exposure_range(min, max)
Set auto exposure range.
Exposure time value spec:
init value = (50, 10000)
range = [1..10000]
step = 1 Convert equation: exp_time * 100 (micro sec.)
Parameters: min
Minimum value of auto exposure time.
max
Maximum value of auto exposure time.
Returns: tuple(int, int)
Auto exposure range. (min, max) Value convert equation: value
* 100 (micro sec.)
See also:
image.CImage.auto_exposure_range
Control by image instance.