Need help?Do you have a question about the Advantech PPC Series and is the answer not in the manual?
General| Touch Technology | Projected Capacitive or Resistive |
|---|---|
| RAM | Varies by model (e.g., 2GB, 4GB, 8GB) |
| Operating System | Windows 10 IoT or Linux |
| Mounting Options | Panel mount, VESA mount |
| IP Rating | IP65 |
| Ethernet | Gigabit Ethernet |
| Serial Ports | RS-232/422/485 |
| USB Ports | USB 2.0/3.0 |
| Power Input | 12-24V DC |
| Operating Temperature | 0°C to 50°C |
| Enclosure | Aluminum or stainless steel |
| Communication Ports | Ethernet |
| Power Supply | 12-24V DC |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Processor | Intel Core i Series |
| Storage | 32GB |
| Display Resolution | 1024x768, 1280x800 |
Press <Del> or <F2> during boot to enter BIOS setup utility.
Navigate through Main, Chipset, Host Bridge, and Intel IGD Configuration menus.
Select Manual or Dynamic Mode to adjust LCD brightness levels.
Use the "Save & Exit" menu to save changes and reset the system.
Double-click the PPC Backlight Adjustment Tool icon to launch the application.
Select Manual Mode and adjust brightness from 10% to 100% via slider.
Select Dynamic Mode to detect ambient light and set brightness range.
Check "Do not execute this AP when startup" to prevent automatic execution.
To Next Page
