Advantech PPC Series - Manual Brightness Setting; Dynamic Brightness Setting

16 PPC Series LED Bakclights Adjustment User Guide
– When selecting “Manual Mode”, you can adjust the backlight from 10% to 100%. Click “Apply” to nish the
conguration, refer to Figure 2.3.
– When selecting “Dynamic Mode”, you can rst “Renew” button to detect the light around the device and set the light
range accordingly. You can also set the value of “Delay time” to prevent the backlight value being changed by
interference of shot-time lights. Click “Apply” to nish the conguration, refer to Figure 2.4 and Figure 2.5.
Method 2