Need help?Do you have a question about the Advantech TPC-1251T-Exxx Series and is the answer not in the manual?
General| Power Supply / Input | 24V DC |
|---|---|
| Display Type | TFT LCD |
| Display Size | 12.1 inch |
| Resolution | 800 x 600 |
| Touch Technology | Resistive |
| RAM / System Memory | 4GB DDR3L |
| Storage | 64GB |
| Operating System | Windows 10 IoT Enterprise |
| Ethernet | 2 x 10/100/1000 Mbps |
| Operating Temperature | 0°C to 50°C |
| IP Rating / Protection Rating | IP66 |
| Serial Ports | 2 x RS-232/422/485 |
| Certification | CE, FCC, UL |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% RH |
Provides an overview of the TPC panel computers and their key features.
Details the system kernel, I/O ports, and operating system support for the devices.
Outlines safety compliance (FCC, CE) and environmental operating conditions.
Lists display type, resolution, viewing angle, luminance, and contrast for different models.
Describes touch type, construction, resolution, light transmission, and lifespan.
Specifies input voltage and typical current draw for the device.
Illustrates the physical layout of input/output ports on the device.
Provides instructions and considerations for mounting the unit into a panel.
Lists physical dimensions and cutout sizes for different model series.
Guides through unpacking, installing storage media, and connecting power.
Instructs on installing essential drivers for Ethernet, VGA, and touchscreen functions.
Advises on checking delivery for damage and proper handling during transport.
Details the process of securing the TPC unit into a panel opening using clamps.
Explains procedures for cabinet integration and proper earth grounding for optimal performance.
Shows diagrams identifying jumper, dip switch, and connector locations on the mainboard.
Explains jumper settings for CMOS clear and switch settings for COM2 mode configuration.
Provides detailed pinouts for various connectors like SATA, Mini PCIE, LAN, USB, and COM ports.
Steps to install the Embedded Controller (EC) driver for system management.
Instructions for installing the utility to control screen brightness.
Guide for installing the driver that monitors system operations.
Steps to install the graphics driver for enhanced display performance.
Instructions for installing the software utility for Intel chipsets.
Guide for installing the Intel Trusted Execution Engine driver.
Steps to install the driver for the Local Area Network (LAN) port.
Instructions for installing the driver for USB 3.0 ports on Windows 7.
Steps to install the driver for the touchscreen interface.
Procedure for calibrating the touchscreen for accurate input.
Details how to configure BIOS settings, specifically OS selection, for Windows 8.X.
To Next Page
