5 TPC-xx51T/H User Manual
Chapter 1 General Information
1.7 Panel Mounting
1. There is a rubber waterproof gasket on the AL front bezel. Make sure the water-
proof gasket is in position before installing TPC into the panel opening.
2. Install the TPC into the panel opening.
3. Take the clamps and long screws from the accessory box. Hook the clamps to
the holes around the four sides of the bezel. Insert the screws into every clamp
and fasten them. These screws will push the mounting panel and fix the unit.
4. The suggested mounting panel thickness is less than 6 mm (0.236”).
1.8 Dimensions and Cutout
TPC-1251T-E Series
Weight: 2.5 kg
Dimensions (W x H x D): 311.8 x 238.0 x 57.2 mm (12.28" x 9.37" x 2.25")
Cutout: 303 x 229 mm
TPC-1551T-E Series
Weight: 3.9 kg
Dimensions (W x H x D): 383.2 x 307.3 x 61.1 mm (15.09" x 12.10" x 2.41")
Cutout: 374.5 x 298.5
TPC-1251H-E Series
Weight: 2.5 kg
Dimensions (W x H x D): 311.0 x 237 x 54 mm (12.24" x 9.37" x 2.25")
Cutout: 303 x 229 mm
TPC-1551H-E Series
Weight: 3.9 kg
Dimensions (W x H x D): 383.0 x 307.0 x 59.0 mm (12.28" x 9.37" x 2.32")
Cutout: 374.5 x 298.5 mm
To Next Page
Loading...
