Advantech PCA-6751 Series User Manual

PCA-6751 Series
Half-size all-in-one Pentium
®
CPU
card with MMX CPU, VGA/LCD and
Fast Ethernet interface
User’s Manual

Advantech PCA-6751 Series Specifications

General

Parallel Port	1 x LPT
Power Consumption	TBD
FDD Interface	1
Serial Ports	2 x RS-232
VGA	Integrated Intel HD Graphics
Watchdog Timer	Yes
Operating Temperature	0°C to 60°C

Summary

Chapter 1 Hardware Configuration

1.1 Introduction

Overview of the PCA-6751 Series, its features, CPU, and product longevity.

1.2 Specifications

Details the standard SBC, VGA, Ethernet, and mechanical specifications.

1.4 Safety precautions

Outlines essential safety measures to prevent harm and damage during handling and installation.

1.5 Jumper settings

Explains how to configure the card using jumpers, covering their function and location.

1.6 Installing system memory (SODIMMs)

Guides on how to correctly install SDRAM SODIMM modules into the designated sockets.

Chapter 2 Connecting Peripherals

2.1 Board layout: Connector locations (component side)

Identifies and labels all connectors on the component side of the PCA-6751 Series board.

2.2 Board layout: Connector locations (solder side)

Identifies and labels all connectors on the solder side of the PCA-6751 Series board.

2.14 Ethernet connector (CN13) (PCA-6751 only)

Describes the RJ-45 connector for the 10/100Base-T Fast Ethernet interface.

2.15 Serial ports (CN16: COM1; CN15: COM2/RS-232; CN14: COM2/RS-422/485)

Explains the two serial ports for connecting devices and communication networks.

Chapter 3 Award BIOS Setup

3.1 Introduction

Overview of the BIOS Setup program and its function in configuring system settings.

3.2 Entering setup

3.3 Standard CMOS setup

Describes the menu for configuring basic system components like date, time, and disk drives.

3.4 BIOS features setup

Details configuration options for various BIOS features affecting system performance and behavior.

3.5 Chipset features setup

Explains settings related to the system chipset, including memory timing and cache.

3.6 Power management setup

Covers features for controlling power consumption and 'green' settings of the CPU card.

3.7 PnP PCI configuration setup

3.10 Integrated peripherals

3.11 Password setting

Chapter 4 PCI SVGA Setup

4.1 Introduction

Overview of the onboard PCI flat panel/VGA interface, its chipset, and display capabilities.

4.2 Installation of SVGA driver

Provides step-by-step instructions for installing the SVGA driver for different operating systems.

Chapter 5 PCI Bus Ethernet Interface With Intel® SB82558/SB82559 (PCA-6751 only)

5.1 Introduction

Overview of the onboard 32-bit PCI-bus Fast Ethernet interface.

5.2 Installation of Ethernet driver

Guides on installing the Ethernet driver for various operating systems like MS-DOS, Windows 3.1, and Windows 95.

Chapter 6 PCI Bus Ethernet Interface With RTL-8139 (PCA-6751 only)

6.1 Introduction

Overview of the onboard 32-bit PCI-bus Ethernet interface using the RTL-8139 chipset.

6.2 Installation of Ethernet driver

Guides on installing the Ethernet driver for Windows 95/98 and Windows NT.

Appendix A Programming the Watchdog Timer

A.1 Programming the watchdog timer

Explains how to program the onboard watchdog timer by writing to an I/O port.

Appendix B Installing PC/104 Modules

B.1 Installing PC/104 modules

Provides instructions and steps for mounting PC/104 modules onto the PCA-6751 Series.

Appendix D System Assignments

D.1 System I/O ports

Lists the system's Input/Output port address ranges and their corresponding devices.

D.2 DMA channel assignments

Details the Direct Memory Access (DMA) channel assignments and their functions.

D.3 Interrupt assignments

Lists the Interrupt Request (IRQ) assignments and their sources.

D.4 1st MB memory map