Chapter 3 Award BIOS Setup 39
3.10 Integrated peripherals
Figure 3-7: Integrated peripherals
Note: If you enable the IDE HDD block mode, the en-
hanced IDE driver will be enabled.
3.11 Password setting
To change, confirm, or disable the password, choose the “PASS-
WORD SETTING” option form the Setup main menu and press
[Enter]. The password can be at most 8 characters long.
Remember, to enable this feature. You must first select the Security
Option in the BIOS FEATURES SETUP to be either “Setup” or
“System.” Pressing [Enter] again without typing any characters can
disable the password setting function.
To Next Page
Loading...
Need help?
General
