1. Scope
This installation guide describes the configuration of Advantech™ WISE-4050
(device) for usage with TIG 2go. This device is connected with four wires to dig-
ital outputs of the machine and sends this information to the TIG 2go cloud.
Installation and commissioning, such as cabling, shall be carried out in a thoroughly
professional manner by duly trained and qualified personnel. In case of any queries re-
garding the machine interface, please contact the machine manufacturer.
1.1. Hardware variants
Advantech™ provides two hardware variants (WIFI and LAN version):
For more information on the device please refer to the manual by the manufacturer which can be
downloaded here.
1.2. Reference
WISE 4050 is a product of:
Advantech Co., Ltd., No. 1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 11491, Taiwan,
R.O.C.
Tel: 886-2-2792-7818, Toll Free: 0800-777-111 https://www.advantech.com
To Next Page
Loading...
