Need help?Do you have a question about the ADVANTEST R3131A and is the answer not in the manual?
General| Frequency Range | 9 kHz to 3 GHz |
|---|---|
| Measurement Type | Spectrum Analysis |
| Video Bandwidth (VBW) | 1 Hz to 3 MHz |
| Total Amplitude Accuracy | ±1.5 dB |
| Third Order Intercept | +10 dBm |
| Input Impedance | 50 Ω |
| Input VSWR | 1.5:1 (typical) |
| Display | LCD |
| Display Size | 8.4 inches |
| Dynamic Range | ≥ 90 dB |
| Input Connector | N-type female |
Keys for operations, data entry, and measurement control.
Features a 5.7-inch display and a floppy disk drive for data management.
Provides marker functions like delta marker and peak search.
High accuracy OBW, ACP, Power measurements, Auto TUNE, Auto CAL.
Improved operability, speed, standard interfaces, and large display.
Compact design, diverse application support, and optional tracking generator.
Suitable for applications in mobile communication fields.
Used for measuring electromagnetic interference.
Applicable for installation and maintenance tasks.
Can be used in CATV applications.
Relevant for testing electronic parts.
Useful in development and production environments.
Automatically sets center frequency to the maximum signal level.
Performs frequency measurement with selectable resolution from 1Hz to 1kHz.
Measures total power within a specified bandwidth.
Obtains total power from the displayed spectrum.
Measures the frequency band containing 99% of total power.
Displays measurement results graphically for adjacent channels.
Performs limit tests based on signal level or limit lines.
Analyzes bursted signals by synchronizing with trigger signals.
Allows setting up to 10 markers for multi-point measurements.
Stores and recalls waveform data and measurement conditions.
Includes XdB Down, noise, AM modulation, and filter cut-off measurements.
Measures EMI using CISPR Pub. 16-1 standard detectors.
Calibrates level indication using built-in antenna correction factors.
Shortened GPIB control, data transmission, and doubled waveform update rate.
Compares trace data output speed and shows waveform update rates.
Illustrates the process of saving data to a floppy and managing it on a PC.
Measures reflection characteristics using an SWR bridge.
Measures high-frequency loss of cables from differential measurements.
Covers frequency/amplitude ranges, accuracy, stability, and measurement errors.
Details sweep time, trigger modes, and dynamic performance metrics.
Lists connectors, interfaces, power, weight, and operating conditions.
Outlines frequency range, output level, and accuracy for OPT.74.
Describes RS-232 and GPIB connections for remote control and data transfer.
Covers External Trigger input and Gated Sweep functionality.
Details the 10MHz Reference Input and Phone output jack.
Mentions Printer interface and Probe connections.
Lists control codes for compatible printers.
To Next Page
