Need help?Do you have a question about the Advent Controls A3.02 and is the answer not in the manual?
General| Brand | Advent Controls |
|---|---|
| Model | A3.02 |
| Category | Control Unit |
| Language | English |
Details the electrical and GSM specifications of the relay board, including power, current, SIM, and GSM phase.
Describes the process of registering the SIM card and initial system startup sequence, including LED indicators.
Explains the structure and syntax for sending SMS commands to operate the system effectively.
Details how to set up and configure master telephone numbers for system control and administration.
Describes the procedure for adding new user telephone numbers that can operate the relay output.
Details how to remove existing telephone numbers from the system memory using the REMOVE command.
Explains the CLEAR ALL command to erase all stored numbers and system configuration settings.
Allows any number to operate the relay or disables open-on-call activation for security.
Configures how the relay activates (timed, toggle, or during call ring) using RLYMODE.
Sets the duration for which the relay remains active after activation in pulsed mode using RLYTIME.
Commands to directly activate or deactivate the relay, with optional timing parameters.
Configures inputs to trigger SMS messages and/or autodialling to specified numbers.
Details the correct power supply voltage requirements and connection methods for AC/DC sources.
To Next Page