TURNING THE UNIT ON OR OFF
1. Push in the Screen Release button to unlock the LCD screen. The screen will drop down slightly.
2. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is
in use.
3. Press the power button on the unit or the remote control to turn the system on and off. When in use, the internal backlighting will
illuminate the controls.
4. After the unit has been turned on and is displaying a picture, adjust the viewing angle by pivoting the screen to optimize the picture quality.
5. Remember to turn the unit off and pivot the LCD screen to the locked position when not in use.
11
Remote Sensor
Infrared Transmitter
Power
ON/OFF
Button
Screen Release
To Next Page
Loading...
Need help?
General
