Advent OVERHEAD LED BACKLIT LCD MONITOR User Manual

CONTROLS AND INDICATORS DIAGRAM FRONT VIEW
1. POWER ( ) Button
Used to turn the system on/o (standby).
2. Infrared Transmitter/Remote Sensor
(Location)
3. Source Select (S) Switch
Used to select one of the four sources: DVD/USB, AV, AUX
Note: USB source selection is only available when a USB memory
device is connected to the unit.
4
4. PL AY (u) Button
This button is used to start playback of a disc.
5. STOP (n) Button
-Press the STOP button once: Stops playback.
- Pressing the PLAY button again will resume normal playback from
where movie was stopped.
- Press the STOP button twice and then press the PLAY button to start
playback from the beginning of the DVD.
6. EJECT ( ) Button
This button is used for ejecting disc from the disc compartment.
7. Three Position Dome Light Switch
ON - Turns on the dome lights.
OFF - The dome lights will not turn on in this position.
AUTO - Automatically switches on the dome lights in conjunction with
the vehicle's interior illumination.
8. Dome Lights
Provide additional interior illumination.
9. Ventilation Openings
10. LCD Cut O Switch
Used to turn o the LCD backlight when the LCD is in the closed
position.
11. LCD Panel
12. Screen Release
Press to release the screen.
1
2
3
4
5
6
7
8
9
10
12
11

Advent OVERHEAD LED BACKLIT LCD MONITOR Specifications

General

Brand	Advent
Model	OVERHEAD LED BACKLIT LCD MONITOR
Category	Car Video System
Language	English