You have doubts about whether your induction hob is working correctly. This does not necessarily mean there is a break-
down. Nevertheless, check the following points.
In all events, if your intervention proves insufficient, contact the After-S ales S ervice immediately.
Troubleshooting.
WHAT S HOUL D YOU DO?P OS SIB LE C AUS E S
C ontact the After-S ales S ervice.
Use a compatible pan (see list provided).
This is normal.
This is normal.
The electronic circuits have broken down.
The pan you are using is not suited to induction cooking.
It is caused by the power being distributed between 2 cooking rings.
C ooling the electronics.
C heck the electrical installation. Inspect the fuses and the circuit
breaker.
The appliance is not being supplied. The electricity supply or the
connection is faulty.
YOU NOT IC E THAT …
The hob does not work.
When you turn the induction hob on the indicator lights on the
keyboard keep flashing.
Your hob makes a slight "clic clac" sound.
T he ventilation continues for a few minutes after the hob has been turned off.
This is normal.Automatic testing of product.
J ust after being connected, the ventilation comes on for a few seconds.
The induction hob is not working. The indicator lights on the
keyboard do not light up.
C heck the conformity of your installation and especially the air
inlets and outlets, as indicated in the instructions.
The electronic circuits are over heated.
The induction hob stopped working during cooking.
The timer may indicate the message
In the event of a fault, note down the me s s age given by the time r and re fer to the fault chart.
Do not be s urpris ed if the glas s s urface of your hob is always s lightly warm . This is norm al.
22
To Next Page
Loading...
Need help?
General
