To allow a new person to send you photos, simply tap the add
friend button and share the frame code with that person.
They will be added automatically once they connect to the
frame through the mobile app.
Note: Your frame is not powered down while sleep mode is on, so it will
not affect your ability to receive photos.
Add friend
Display
Brightness level
Adjust the brightness level of the screen.
Sleep mode
Sleep mode allows you to reduce power consumption by
automatically turning off and waking up the device at set times.
The default setting turns off the screen at 11:00 pm and wakes
it up at 7:00 am. You can adjust the start/end time as desired.
10
Delete friend
Friend settings
To remove a person from your friends list, tap delete friend.
They will no longer have permission to send photos to your
frame. You also have the option to delete all photos from this
person at the same time.
Here you can give permission for the friend to share the frame
code with others. You can also delete a friend if you no longer
want to receive photos from them.
This page contains a list of all people that are allowed to send
photos to your frame.
My Friends
En
To Next Page
Loading...