AEG 49002VMN - Installation Guide; Hob Display Errors; Oven Display Errors; Technical Data

Problem Possible cause Remedy
The hob display shows
The fuses are blown Control the fuses
The hob display shows
No cookware on the cooking
zone
Put cookware on the cooking
zone
The hob display shows
Incorrect cookware Use the correct cookware
The hob display shows
The diameter of the bottom of
the cookware is too small for
the cooking zone
Use cookware with larger di-
ameter of the bottom
The oven display shows "F9" The power plug is out of the
wall outlet
Put the power plug in the wall
outlet and start the cooker
again
The oven display shows "SAFE" The Child Lock operates Deactivate the Key Lock, refer
to "Hob - Daily Use" chapter
and "The child safety device"
The oven display shows "LOC" The Key Lock operates Deactivate the Key Lock, refer
to "Hob - Daily Use" chapter
and "Locking / unlocking the
control panel"
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
WARNING!
Refer to "Safety information" chapter.
Technical Data
Dimensions
Height 900 mm
Width 596 mm
Depth 600 mm
Top oven capacity 40 l
Main oven capacity 74 l
38 Installation